Do you want your Netgear Orbi router to work well at every hour of the day? Yes? Well then, you need to keep its firmware up-to-date whenever you get the opportunity. What happened? Do you take care of that every time but this time you got stuck during the process? We understand what you are going through. That is why this post has been penned up by us. Thus, walk through the troubleshooting hacks mentioned below and get to know how to troubleshoot the Netgear Orbi firmware update failure issue.
How to Fix Orbi Firmware Update Failure Issue?
- Follow the Correct Instructions
Before you take the help of any troubleshooting step mentioned below, check whether you have followed the correct guidelines to update the firmware of your Netgear Orbi device.
If you haven’t, then it is time that you rectify your mistake. Are you still not able to perform Netgear Orbi firmware update successfully? Well, it looks like you will have to follow the hacks given below after all.
- Reboot Your Netgear Orbi Router
Sometimes, an unknown reason can cause the Netgear Orbi router firmware update failure issue. To get rid of such unknown reasons, it is recommended that you reboot your Orbi. In order to do so, you need to disconnect your Orbi from its power socket, hold on for about a few seconds, and then, connect your device back to where it was previously plugged.
- Check the Firmware Version
There is a possibility that you did not download the correct firmware version for your Netgear Orbi router. Therefore, do it now. What happened? Are you not sure about which firmware version to download for your device? Well, just know that it needs to be compatible with the Orbi model that you are currently using.
- Verify the Ethernet Connection
By all means, the Ethernet cable that you have used to establish a connection between your Netgear Orbi router and the existing modem ought to be free of damaged. However, it looks like you did not pay attention to this point while setting up your device, or else, you wouldn’t be stuck with the Netgear Orbi router firmware update failure issue.
Therefore, ensure that the cable has no cuts on it whatsoever. Also, make sure that there is a finger-tight connection between your devices.
Once you have followed this hack, access the orbilogin page and try to update your device. Don’t tell us, you still didn’t luck?
- Eliminate WiFi Interference
If nothing has worked for you so far in troubleshooting the Netgear Orbi firmware update failure issue, perhaps, this hack might be useful.
Therefore, make sure that your Orbi router as well as the satellite is not kept near transmitting appliances, metal objects, reflexive surfaces, and electronic devices. The reason being, such things can block the WiFi signals of your device from getting transmitted properly.
- Reboot Your Netgear Orbi Router
We only recommend this hack to users when they have banged their head against the wall, sweated a lot, and still aren’t able to fix the Netgear Orbi firmware update failure issue.
Thus, if you are reading this hack, then you have done all those things. But, worry not. Performing Netgear Orbi factory reset will surely be of some good use to you.
In order to reset your Orbi device, you need to locate the Reset button, press it once found, and then, wait for a couple of seconds.
Final Words
With pride, we are wrapping up our guide on troubleshooting the Netgear Orbi router firmware update failure issue. Here is to hope that the aforementioned hacks helped you fix the issue you were stuck with.
Did you like reading this article? Is that a yes? Do share your feedback with your fellow readers via the comment section.
